Litens
Select Your Vehicle
This Litens belt tensioner is manufactured by the original equipment (O.E.) tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer's logo or part number applied to the part). As with the original equipment part, this replacement tensioner is manufactured in Japan for Toyota Lexus "AR" engine applications. The tensioner maintains the O.E. round spring technology as well as the internal damping design specified for this application. As with the original tensioner, the part comes equipped with a heavy duty polymer pulley for optimum performance and durability. To assist with belt removal and installation, this tensioner is equipped with a lift feature on the arm. A molded location pin is molded into the base to ensure exact installation location.
- Accessory Drive Belt Tensioner - Original Equipment Quality
P311-2073CE5 999415A Litens New
| Vehicle | Fuel Type | Block | Engine | CID | CC |
|---|---|---|---|---|---|
| 2017 Lexus NX300h | FULL HYBRID EV-GAS (FHEV) | L | 4 Cyl 2.5L | 152 | 2494 |
-
Features:
- Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
- Internal "round spring" technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
- Installation instructions included.
- Heavy Duty Polymer Pulleys
- Professional Mechanics will change this tensioner in 20 minutes to 1 hour
- Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
- Bearing Bore Inside Diameter: 17
- Belt Type: V-ribbed
- Contact Surface: Smooth/backside
- Material: Thermoplastic
- Mounting Bolt Hole Quantity: 1
- OE Comparison Rating: Oe Exact
- Pulley 1 Flanged: No
- Pulley Quantity: 1
- Accessory Belt Drive Idler Pulley - Original Equipment Quality
P311-5F228AE 900665A Litens New
| Vehicle | Fuel Type | Position | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|
| 2018 Mercedes-Benz GLS63 AMG | GAS | Grooved Pulley | V | 8 Cyl 5.5L | 333 | 5461 |
-
Features:
- Manufactured by the Original Equipment supplier.
- All OE Hardware included: Bolt, Dust Shield, Plastic Retainer.
- Heavy duty thermoplastic pulley for long life.
- Pulley Specs: 65mm (OD) x 17mm (ID) x 25mm (Width)
- 6-Ribbed/Grooved Pulley.
- Bearing Bore Inside Diameter: 17
- Contact Surface: V-ribbed Grooved
- Groove Quantity: 6
- Material: Thermoplastic
- OE Comparison Rating: Oe Exact
- Pulley 1 Flanged: Yes
- Pulley Quantity: 1
- Accessory Drive Belt Tensioner - Original Equipment Quality
P311-031C143 999607A Litens New
| Vehicle | Fuel Type | Block | Engine | CID | CC |
|---|---|---|---|---|---|
| 2018 Nissan Altima | GAS | L | 4 Cyl 2.5L | 152 | 2488 |
-
Features:
- Heavy duty thermoplastic pulley construction
- OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
- Install pin included for ease of installation
- Installation instructions included
- Bearing Bore Inside Diameter: 17
- Belt Type: V-ribbed
- Contact Surface: Smooth/backside
- Material: Thermoplastic
- Mounting Bolt Hole Quantity: 2
- OE Comparison Rating: Oe Exact
- Pulley 1 Flanged: No
- Pulley Quantity: 1
- Accessory Drive Belt Tensioner - Original Equipment Quality
P311-45E1D17 999487A Litens New
| Vehicle | Fuel Type | Block | Engine | CID | CC |
|---|---|---|---|---|---|
| 2011 Toyota 4Runner | GAS | V | 6 Cyl 4.0L | 241 | 3956 |
-
Features:
- Heavy duty steel pulley construction
- OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
- Installation instructions included
- Bearing Bore Inside Diameter: 10.2
- Belt Type: V-ribbed
- Contact Surface: Smooth/backside
- Material: Steel
- Mounting Bolt Hole Quantity: 5
- OE Comparison Rating: Oe Exact
- Pulley 1 Flanged: No
- Pulley Quantity: 1
- Accessory Belt Drive Idler Pulley - Original Equipment Quality
- Grooved / Plastic - Includes Pulley, Bolt, and Cap.
P311-3A3D278 951948A Litens New
| Vehicle | Fuel Type | Block | Engine | CID | CC |
|---|---|---|---|---|---|
| 2021 Mercedes-Benz Sprinter 3500 | DIESEL | V | 6 Cyl 3.0L | - | 2987 |
-
Features:
- Heavy duty thermoplastic pulley construction
- OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
- All hardware included for easy installation (2 Dustshields, Bolt, Bolt Retainer), saving you time!
- Installation instructions included
- Bearing Bore Inside Diameter: 17
- Belt Type: V-ribbed
- Contact Surface: V-ribbed Grooved
- Groove Quantity: 7
- Material: Thermoplastic
- Mounting Bolt Hole Quantity: 1
- OE Comparison Rating: Oe Exact
- Pulley 1 Flanged: Yes
- Pulley Quantity: 1
- Accessory Drive Belt Tensioner - Original Equipment Quality
P311-4B465B5 910588A Litens New
| Vehicle | Fuel Type | Block | Engine | CID | CC |
|---|---|---|---|---|---|
| 2016 Blue Bird All American RE | DIESEL | L | 6 Cyl 6.7L | 408 | - |
-
Features:
- Manufactured by one of the largest original equipment part suppliers to ensure proper form, fit, and performance
- Internal "round spring" technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
- Heavy Duty Steel Pulley with a 6304 close tolerance ball bearing and Electro-deposited coating for superior corrosion resistance
- Large pivot bushing
- Installation instructions included
- Bearing Bore Inside Diameter: 30
- Belt Type: V-ribbed
- Contact Surface: Smooth/backside
- Material: Steel
- Mounting Bolt Hole Quantity: 1
- OE Comparison Rating: Oe Performance
- Pulley 1 Flanged: No
- Pulley Quantity: 1
- Accessory Belt Drive Idler Pulley - Original Equipment Quality
P311-1DED0D3 900663A Litens New
| Vehicle | Fuel Type | Position | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|
| 2018 Mercedes-Benz GLS63 AMG | GAS | Smooth Pulley | V | 8 Cyl 5.5L | 333 | 5461 |
-
Features:
- Manufactured by the Original Equipment supplier.
- All OE Hardware included: Bolt, Dust Shield, Plastic Retainer.
- Heavy duty thermoplastic pulley for long life.
- Pulley Specs: 65mm (OD) x 17mm (ID) x 25mm (Width)
- Smooth/Backside Pulley.
- Bearing Bore Inside Diameter: 17
- Contact Surface: Smooth/backside
- Groove Quantity: 0
- Material: Thermoplastic
- OE Comparison Rating: Oe Exact
- Pulley 1 Flanged: No
- Pulley Quantity: 1
- Accessory Belt Drive Idler Pulley - Original Equipment Quality
- W/65mm Diameter Pulley
P311-5F228AE 900665A Litens New
| Vehicle | Fuel Type | Position | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|
| 2018 Mercedes-Benz G63 AMG | GAS | Upper | V | 8 Cyl 5.5L | 333 | 5461 |
-
Features:
- Manufactured by the Original Equipment supplier.
- All OE Hardware included: Bolt, Dust Shield, Plastic Retainer.
- Heavy duty thermoplastic pulley for long life.
- Pulley Specs: 65mm (OD) x 17mm (ID) x 25mm (Width)
- 6-Ribbed/Grooved Pulley.
- Bearing Bore Inside Diameter: 17
- Contact Surface: V-ribbed Grooved
- Groove Quantity: 6
- Material: Thermoplastic
- OE Comparison Rating: Oe Exact
- Pulley 1 Flanged: Yes
- Pulley Quantity: 1
- Accessory Drive Belt Tensioner - Original Equipment Quality
- W/Elec. P.S.
P311-031C143 999607A Litens New
| Vehicle | Fuel Type | Block | Engine | CID | CC |
|---|---|---|---|---|---|
| 2013 Nissan Altima | GAS | L | 4 Cyl 2.5L | 152 | 2488 |
-
Features:
- Heavy duty thermoplastic pulley construction
- OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
- Install pin included for ease of installation
- Installation instructions included
- Bearing Bore Inside Diameter: 17
- Belt Type: V-ribbed
- Contact Surface: Smooth/backside
- Material: Thermoplastic
- Mounting Bolt Hole Quantity: 2
- OE Comparison Rating: Oe Exact
- Pulley 1 Flanged: No
- Pulley Quantity: 1
- Accessory Belt Drive Idler Pulley - Original Equipment Quality
- Grooved / Plastic - Includes Pulley, Bolt, and Cap.
P311-3A3D278 951948A Litens New
| Vehicle | Fuel Type | Block | Engine | CID | CC |
|---|---|---|---|---|---|
| 2019 Mercedes-Benz Sprinter 3500 | DIESEL | V | 6 Cyl 3.0L | - | 2987 |
-
Features:
- Heavy duty thermoplastic pulley construction
- OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
- All hardware included for easy installation (2 Dustshields, Bolt, Bolt Retainer), saving you time!
- Installation instructions included
- Bearing Bore Inside Diameter: 17
- Belt Type: V-ribbed
- Contact Surface: V-ribbed Grooved
- Groove Quantity: 7
- Material: Thermoplastic
- Mounting Bolt Hole Quantity: 1
- OE Comparison Rating: Oe Exact
- Pulley 1 Flanged: Yes
- Pulley Quantity: 1
